LumoWipe screen-cleaning kit and a hand wiping a screen with a purple microfibre cloth

How to Clean a Screen Safely: 5 Mistakes to Avoid

How to clean a screen safely and avoid streaks? Switch the device off, use a clean, soft microfibre cloth and apply only a small amount of liquid suitable for that display if needed. Dampen the cloth rather than spraying the screen, wipe gently and let the surface dry before switching the device back on.

A phone, laptop, monitor and TV can have different surface coatings. The five mistakes below explain what to check before cleaning, how to control moisture and why your cloth matters as much as your cleaner.

1. Using a cleaner without checking its intended use

A screen cleaner may be intended for several devices, but check its instructions alongside your device manufacturer's guidance. Special coatings can require a particular cloth or cleaning method.

Household window cleaners, abrasive products, acetone and strong solvents are poor default choices. Alcohol also needs a device-specific answer: Apple permits certain alcohol-based cleaning methods for specified surfaces, while Samsung's monitor guidance advises against alcohol, ammonia and window cleaners. Follow the instructions for your model.

2. Spraying cleaner directly onto the screen

Liquid can run towards the display edges and into openings. Applying it to the cloth gives you better control over the amount used.

Switch off and unplug where appropriate, gently remove loose dust, then lightly dampen the cloth with a permitted liquid if marks remain. Wipe without pressing hard. Finish with a clean, dry section of the cloth where the device instructions allow, and leave the screen to dry.

3. Using paper towels or a dirty cloth

Rough fabric, paper towels and trapped particles can drag across a sensitive surface. Choose a clean, soft, lint-free microfibre cloth, or the specific cloth required for your display.

  • Keep a cloth exclusively for screens.
  • Do not use the cloth that just collected crumbs from your desk.
  • Check for grit before wiping and avoid dragging hard particles over the glass.
  • Wash the cloth according to its care instructions and let it dry fully before storage.

When using LumoWipe screen cleaner, apply a small amount to the microfibre cloth and follow the product and device instructions.

4. Pressing too hard

More pressure does not necessarily remove a mark more effectively. Laptop, monitor and TV panels need a light touch. If a greasy mark remains, check the recommended method for stubborn residue instead of scrubbing harder.

Work gently and keep the cloth clean. Avoid repeatedly rubbing the same area with increasing force.

5. Cleaning while the device is switched on

An unlit screen makes dust and smudges easier to spot. Switching the device off also avoids accidental touchscreen input. Disconnect power where appropriate and keep moisture away from the edges and ports.

Wait until the display and surrounding areas are dry before reconnecting and switching on.

How to clean a screen: 6 practical steps

  1. Check the model's care instructions. Identify any special coating or required cloth.
  2. Switch off. Disconnect power and cables where appropriate.
  3. Remove loose dust gently. Start with the clean cloth recommended for the display.
  4. Dampen only if needed. Use a small amount of a suitable liquid on the cloth.
  5. Wipe lightly. Keep liquid away from the device's openings.
  6. Allow to dry. Reconnect only when the surface is dry.

How to avoid streaks when cleaning a screen

Excess liquid, a dirty cloth or an unsuitable product can leave residue. Begin with dry cleaning. If that is not enough, use the smallest practical amount of a suitable liquid rather than soaking the cloth.

Inspect the result once dry. If streaks remain, check the cloth and the manufacturer's guidance before adding more cleaner.

Can you clean a screen with alcohol?

It depends on the device and coating. A method allowed for one screen should not automatically be used on another. For Apple laptops, see our MacBook screen-cleaning guide, which separates standard displays from nano-texture glass.

How often should you clean a screen?

Clean when visible dust, fingerprints or greasy marks need attention. There is no universal schedule: a frequently touched phone may need cleaning more often than a TV.

For a desk with several devices, our home-office screen-care guide explains how to fit cleaning into your working routine without unnecessary repeated wiping.

Screen-cleaning FAQs

What should I use to clean a phone screen?

Start with a clean, soft microfibre cloth. If liquid is needed, use a method permitted by the phone manufacturer and apply it to the cloth.

Can I use a paper towel?

A soft, lint-free cloth is the better choice for delicate screens. Check for trapped particles before use.

How do I remove oily fingerprints?

If a dry cloth does not remove them, lightly dampen the cloth with a suitable liquid. Use gentle movements and avoid increasing pressure.

LumoWipe for everyday screen care

We make LumoWipe in Lithuania for phones, tablets, computers, monitors, TVs and car infotainment screens. Its ammonia-free formula removes dust, greasy marks and fingerprints, with a mild, pleasant scent.

In our own product tests, we observe fewer visible fingerprint marks after use. Screens can still become marked again, so clean as needed. Explore the LumoWipe screen-cleaning kit and check your model's instructions, especially for special display coatings.

Back to blog